Brother Tn630 Instructions Manual For Mac

Multi-Protocol Print Server NC-6100h Network User's Guide Version 1 Please read this manual thoroughly before using the printer. You can print or view this manual from the CD-ROM at any time, please keep the CD-ROM in a convenient place for qu.

i Trademarks Brother is a registered trademark of Brother Industries, Ltd. HP, HP-UX, JetDirect and JetAdmin are trademarks of Hewlett-Packard Company. DEC, DEC server, VMS, LAT, and ULTRIX are trademarks of Digital Equipment Corporation. UNIX is a.

ii IMPORTANT NOTE:For technical and operational assistance, you must call. Calls must be made from within that country. In USA 1-800-276-7746 In Canada 1-877-BROTHER (514) 685-6464 (In Montreal) If you have any comments or suggestions, please wr.

iii IMPORTANT INFORMATION: REGULATIONS Federal Communications Commission (FCC) Declaration of Conformity (For U.S.A. only) Responsible Party: Brother International Corporation 100 Somerset Corporate Boulevard Bridgewater, NJ 08807-0911, USA TEL: (9.

iv Intel Copyright and License Information This products includes object code from Intel’s UPnP SDK. The following is the copyright and licensing information for Intel UPnP SDK. Copyright© 2000 Intel Corporation All rights reserved. Redistributio.

v “EC” Declaration of Conformity Manufacturer Brother Industries Ltd., 15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan Plant Shima Buji Xialilang Factory, Xialilang Village, Buji, Long Gang, Shenzhen, China 518112 Herewith declare that: Pr.

vi Table of Contents IMPORTANT INFORMATION: REGULATIONS ...iii Federal Communications Commission (FCC) Declaration of Conformity (For U.S.A. only) ....iii Industry Canada Compliance Statement (For Canada only)......

vii LAN Server, OS/2 Warp Server Configuration ...2-7 Server Configuration............2-7 Configuration of an OS/2 Server .......2-8 Other Sources of Information .......

viii Brother Internet Print: Configuring the Brother Print Server...................5-3 Print Server Configuration Checklist......5-3 Brother Internet Print: Using BRAdmin to Co.

ix Configuring the Brother Print Server (Remote Printer Mode) Using PCONSOLE and BRCONFIG................6-18 Other Sources of Information .........6-22 7 Printing From a Mac.

x Changing the IP Address Using the BRAdmin Application .....................10-2 Using BRAdmin and the IPX/SPX Protocol to Set the IP Address ............

xi WebJetAdmin ...............A-2 TELNET.................A-2 BRCONFIG................A-2 Using Services....

1 - 1 UNIX PRINTING 1 1 Unix Printing Printing from Unix/Linux Using TCP/IP Overview Brother print servers are supplied with the Transmission Control Protocol/Internet Protocol (TCP/IP) protocol suite. Since virtually all UNIX host computers suppor.

UNIX PRINTING 1 - 2 4 The default name for a Brother print server is usually BRN_xxxxxx (where xxxxxx is the last six digits of the Ethernet address of the print server). 5 When configuring the PRINTCAP file, pay particular attention to the servi.

1 - 3 UNIX PRINTING The actual format of the entry may vary depending on your system, check your system documentation and also note the format of other entries in the /etc/hosts file. In any case, the node name in the /etc/hosts file must match the.

UNIX PRINTING 1 - 4 3 Configure the /etc/printcap file on each host computer to specify the local print queue, the print server name (also called remote machine or rm), and the print server service name (also called remote printer, remote queue, o.

1 - 5 UNIX PRINTING %lpc status laser1: queuing is enabled printing is enabled no entries no daemon present Users of AT&T-compatible UNIX systems can generally use the lpstat or rlpstat commands to obtain similar status information. Because thi.

UNIX PRINTING 1 - 6 Linux Configuration If you do not wish to use the command line interface to configure your Linux distribution, you may wish to use the Linux Printer System Manager application on your GUI. To do this, do the following: 1 From th.

1 - 7 UNIX PRINTING HP-UX Configuration In the case of HP-UX10.xx, the sam program is used to set up the remote printer. The steps are as follows: 1 Execute the sam program. From the list of options, select Printers and Plotters. 2 Select LP Spoole.

UNIX PRINTING 1 - 8 Earlier versions of HP-UX use similar procedures to 10.xx users: 1 Enter sam and select Peripheral Devices and then Add Remote Printer (not Networked printer). 2 Enter the following remote printer settings (the other settings do .

1 - 9 UNIX PRINTING The procedure for pre-V4.0 systems is as follows. 1 Enter smit and select devices. 2 Select printer/plotter. 3 Select manage remote printer subsystem. Dell inspiron 3521 bluetooth drivers download. 4 Select client services. 5 Select remote printer queues. 6 Select add a remote.

UNIX PRINTING 1 - 10 If this is the first printer configured, you must also use the lpsched command prior to the accept command. As an alternative, you may use Printer Manager in the Admintool utility under OpenWindows. Select Edit, Add, and Add Ac.

1 - 11 UNIX PRINTING SCO UNIX requires TCP/IP V1.2 or later to work with Brother print servers. You must first configure the /etc/hosts and /etc/ printcap files as described in step 2. Then run the sysadmsh program as follows: 1 Select Printers. 2 .

UNIX PRINTING 1 - 12 Use the following one-line OS/400 command to create the LPD queue: CRTOUTQ OUTQ(<queuename> RMSTSYS (*INTNETADR) RMTPRTQ(<service>) AUTOSTRWTR(1) CNNTYPE(*IP) DESTTYPE (*OTHER) MFRTYPMDL (<driver>) INTNETADR(&a.

1 - 13 UNIX PRINTING OS/400 version 4, 5, 5.1 You can also use the following command line to create a printer definition: CRTDEVPRT DEVD(BR2) DEVCLS(*LAN) TYPE(3812) MODEL(1) LANATTACH(*IP) PORT(9100) FONT(011) PARITY(*NONE) STOPBITS(1) TRANSF.

UNIX PRINTING 1 - 14 On some systems it is also necessary to start the daemon. This is done on Berkeley-compatible UNIX systems with the lpc start command as shown in the following example: lpc start laser1 Other Sources of Information Refer to ch.

2 - 1 TCP/IP PRINTING 2 2 TCP/IP Printing Printing from Windows NT ® 4.0, Windows ® 2000/XP, LAN Server and Warp Server Overview Users of Windows NT ® 4.0 can print directly to a network-ready Brother printer using the TCP/IP protocol. Microso.

TCP/IP PRINTING 2 - 2 4 Windows ® 95/98/Me users can send print jobs using the IPP protocol via a Windows ® 2000/XP computer providing that the Microsoft Internet Print Services software is installed on the client PC, IIS is installed and runn.

2 - 3 TCP/IP PRINTING 3 Click on Next. 4 You must now select the correct Network printing port. Select a new port from the pull-down window and select Standard TCP/IP Port. 5 When you have done that click Next. 6 The Add Standard TCP/IP Port Wizard.

TCP/IP PRINTING 2 - 4 Windows ® 2000/XP Printing (Printer Driver already installed) If you have already installed the printer driver and wish to configure it for network printing, follow these steps: 1 Select the printer driver you wish to config.

2 - 5 TCP/IP PRINTING 7 Click OK to exit (your Windows NT ® 4.0 workstation or server will need to be re-booted). Windows NT ® 4.0 Printing: Installing the Brother Peer to Peer Software 1 Start the CD-ROM installation menu program according to th.

TCP/IP PRINTING 2 - 6 Windows NT ® 4.0 Printing: Associating to the Printer You must now create a printer on your Windows ® system using the standard Windows ® printer setup procedure. 1 To do this, go to the Start button, select Settings and .

2 - 7 TCP/IP PRINTING Windows NT ® 4.0 Printing: Adding a Second Brother LPR Port You do not need to re-run the install program to add a new Brother LPR port. Instead, click the Start button, select Settings, and open the Printers window. Click o.

TCP/IP PRINTING 2 - 8 Configuration of an OS/2 Server 1 From the OS/2 desktop open the Templates folder. Use the right mouse button to drag the Printer icon (not the Network Printer icon) onto the desktop. 2 The Create a Printer window should be op.

2 - 9 TCP/IP PRINTING Open the LAN Services folder and execute the LAN Requester program: 1 Select Definitions. 2 Select Aliases. 3 Select Printers. 4 Select Create. Enter the following: 5 Exit the LAN Requester program. 6 You should now be able to .

TCP/IP PRINTING 2 - 10 11 This will make the printer appear to the software as a printer that is directly connected to the parallel port of the workstation. Other Sources of Information Refer to chapter 10 of this User’s Guide to learn how to conf.

3 - 1 PEER TO PEER PRINTING 3 3 Peer to Peer Printing How to Print in a Windows ® 95/98/Me Peer to Peer Network Overview Microsoft's Windows ® 95/98/Me operating systems feature built-in networking capabilities. These capabilities allow a .

PEER TO PEER PRINTING 3 - 2 4 Windows ® 95/98/Me users can send print jobs using the IPP protocol via a Windows ® 2000 computer providing that the Microsoft Internet Print Services software is installed on the client PC, IIS is installed and r.

3 - 3 PEER TO PEER PRINTING Installing the Brother Peer to Peer Software 1 Start the CD-ROM installation menu program according to the Quick Setup Guide. 2 Select the proper model and then the Software Installation menu. Then select the appropriate.

PEER TO PEER PRINTING 3 - 4 8 Click the OK button. When prompted you must re-boot your computer. Associating to the Printer You must now create a printer on your Windows ® system using the standard Windows ® printer setup procedure. 1 To do th.

3 - 5 PEER TO PEER PRINTING Adding a Second Brother LPR Port You do not re-run the install program to add a new Brother LPR port. Instead, click the Start button, select Settings, and open the Printers window. Click on the icon of the printer that .

NETBIOS PEER TO PEER PRINTING 4 - 1 4 4 NetBIOS Peer to Peer Printing How to Print Using NetBIOS in Windows ® 95/98/Me/2000/XP, Windows NT ® 4.0, LAN Server and OS/2 Warp Server Overview Brother print server range supports SMB (server message b.

4 - 2 NETBIOS PEER TO PEER PRINTING Print Server Configuration In order for this function to work, you must correctly change the domain name or workgroup name to match that of your network. Once this is done, the print server will appear automatica.

NETBIOS PEER TO PEER PRINTING 4 - 3 Changing the Workgroup/Domain Name Using TELNET or BRCONFIG or a Web Browser If you are unable to use the BRAdmin application, you can use TELNET, a web browser or the BRCONFIG Remote console program (BRCONFIG r.

4 - 4 NETBIOS PEER TO PEER PRINTING NetBIOS Port Monitor for Windows ® 95/98/Me/ 2000/XP and Windows NT ® 4.0 This software requires the TCP/IP transport protocols to be installed on your Windows ® 95/98/Me/2000/XP and Windows NT ® 4.0 comput.

NETBIOS PEER TO PEER PRINTING 4 - 5 7 You must now enter the server name and port name for the actual print server. You can use the Browse button to search for the print server, select the domain/workgroup name, and then the server is listed. If t.

4 - 6 NETBIOS PEER TO PEER PRINTING 4 Select Local Printer when you are asked how the printer is connected to your computer, and then click Next. 5 Select the correct driver. Click Next when you are done. 6 If you have selected a printer driver that.

NETBIOS PEER TO PEER PRINTING 4 - 7 8 Enter any desired name for the Brother printer and click Next. For example, you could call the printer 'Networked Brother Printer'. 9 Select Not Shared or Shared and Share Name and click Next. 10 Win.

4 - 8 NETBIOS PEER TO PEER PRINTING Windows NT ® 4.0 / Windows ® 2000/XP 2 Click on the Ports tab and click the Add Port button. In the Add Port dialog, highlight Brother NetBIOS port. Click New Port and enter the port name. The default port na.

NETBIOS PEER TO PEER PRINTING 4 - 9 Workstation Configuration: On each workstation that you wish to print from, execute the following step: Go to the DOS or OS/2 command prompt and enter the command: NET USE LPTx: NodeNameServiceName Where x is t.

5 - 1 CONFIGURING INTERNET PRINTING FOR WINDOWS ® 5 5 Configuring Internet Printing for Windows ® Internet Printing Installation Overview Brother's Brother Internet Print (BIP) software, for Windows ® 95/98/ Me and Windows NT ® 4.0, allows.

CONFIGURING INTERNET PRINTING FOR WINDOWS ® 5 - 2 5 Windows ® 95/98/Me users can send print jobs using the IPP protocol via Windows ® 2000 computer, provided that the Microsoft Internet Print Services software is installed on the client PC, .

5 - 3 CONFIGURING INTERNET PRINTING FOR WINDOWS ® ■ At the remote site, an E-mail server receives the E-mail message. The remote print server, which has its own E-mail address, uses the POP3 protocol (Post Office Protocol 3) to download the E-ma.

CONFIGURING INTERNET PRINTING FOR WINDOWS ® 5 - 4 Brother Internet Print: Using BRAdmin to Configure the Print Server The steps required to configure the print server to receive print jobs from a Windows ® 95/98/Me/2000/XP and Windows NT ® 4.0.

5 - 5 CONFIGURING INTERNET PRINTING FOR WINDOWS ® 7 The print server is configured by default to poll the POP3 server every 30 seconds. You may change this value, if desired. 8 If you have enabled notification, enter the address of your SMTP serve.

CONFIGURING INTERNET PRINTING FOR WINDOWS ® 5 - 6 Brother Internet Print: Using TELNET to Configure the Print Server 1 When you get the Local> prompt after connecting to the console, enter the command: SET POP3 ADDRESS address where ipaddr.

5 - 7 CONFIGURING INTERNET PRINTING FOR WINDOWS ® Brother Internet Print: Installing the BIP Software on Windows ® 95/98/Me/2000/XP and Windows NT ® 4.0 To install the BIP software on a Windows ® 95/98/2000/XP and Windows NT ® 4.0 PC, execu.

CONFIGURING INTERNET PRINTING FOR WINDOWS ® 5 - 8 9 You will then be asked to enter the port settings for the remote print server: Enter any unique legal Internet E-mail address for the remote print server (for example [email protected]). Note.

5 - 9 CONFIGURING INTERNET PRINTING FOR WINDOWS ® 17 Select the Brother Internet port (BIP.) which you selected in step 6 and click Next. <For Windows NT ® 4.0 and Windows ® 2000/XP users> 15 Select the Brother Internet port (BIP.) whi.

CONFIGURING INTERNET PRINTING FOR WINDOWS ® 5 - 10 Adding a Second Brother Internet Port You should not re-run the install program to add a new Brother Internet Port. Instead, click the Start button, select Settings, and open the Printers window.

5 - 11 CONFIGURING INTERNET PRINTING FOR WINDOWS ® of your printer). 5 When you click Next, Windows ® 2000/XP will make a connection with the URL that you specified. If the printer driver has already been installed: If the appropriate printer dri.

CONFIGURING INTERNET PRINTING FOR WINDOWS ® 5 - 12 Specifying a Different URL Please note that there are several possible entries that you can enter for the URL field. http://printer_ip_address:631/ipp This is the default URL and we recommend that.

6 - 1 NOVELL NETWARE PRINTING 6 6 Novell NetWare Printing How to Configure Novell NetWare Printing Overview Brother print servers allow NetWare client PCs to print jobs on the same printer as TCP/IP or other network protocol users. All NetWare job.

NOVELL NETWARE PRINTING 6 - 2 General Information In order to use a Brother print server on a NetWare network, one or more file servers must be configured with a print queue that the print server can service. Users send their print requests to the .

6 - 3 NOVELL NETWARE PRINTING Creating a NDPS Printer Using NWADMIN for NetWare5 With NetWare 5, Novell has released a new preferred printing system called Novell Distributed Print Services (NDPS). Before the print server can be configured, NDPS m.

NOVELL NETWARE PRINTING 6 - 4 NDPS Broker When NDPS is installed, an NDPS broker is loaded onto the network. One of the Broker services Resource Management Service allows Printer Drivers to be installed onto the server for use with Printer Agents.

6 - 5 NOVELL NETWARE PRINTING Creating a Printer Agent Follow the steps below to create a Printer Agent for the control access printer (NDS object). 1 In NetWare Administrator, select object create NDPS Printer. Enter the NDPS printer name. 2 .

NOVELL NETWARE PRINTING 6 - 6 5 Select None for the printer Type, and Novell Port Handler for the Port Handler Type. Then click OK. 6 You must now specify the type of connection that you are going to use. There are four possible options. Select the.

6 - 7 NOVELL NETWARE PRINTING 3 One or more print servers will appear in the list (the default node names are BRN_xxxxxx, where xxxxxx is the last six digits of the Ethernet address (MAC address)). 4 Select the print server that you wish to config.

NOVELL NETWARE PRINTING 6 - 8 Creating the NetWare Print Server (NDS Queue Server) Using BRAdmin Professional Utility 1 Make sure that you logged in as ADMIN in NDS mode. 2 Start BRAdmin. 3 One or more print server services will appear in the list (.

6 - 9 NOVELL NETWARE PRINTING e Your queue name will appear in the TREE and Context that you specified. Select the queue and click on Add. The queue name will then be transferred to the Service Print Queues Window. You will be able to see the TREE.

NOVELL NETWARE PRINTING 6 - 10 7 Change context if required and then double click the name of the printer you created in step 3. 8 Click Assignments. 9 Click Add. 10 Change the context if necessary. 11 Select the print queue you created in step 5. 1.

6 - 11 NOVELL NETWARE PRINTING 18 Start the appropriate BRAdmin application, and select the correct print server from the list (by default, the node name is BRN_xxxxxx, where xxxxxx is the last six digits of the Ethernet address (MAC address)). 19.

NOVELL NETWARE PRINTING 6 - 12 Creating the NetWare Print Server (NDS Remote Printer) Using Novell NWAdmin and BRAdmin Professional Utility To configure a Brother print server for remote printer mode with NWADMIN (NetWare Administrator utility) an.

6 - 13 NOVELL NETWARE PRINTING 12 Change context if necessary and select the print queue you created. Click OK and then OK again, and then exit NWADMIN. 13 Start the appropriate BRAdmin application, and select the correct print server you wish to c.

NOVELL NETWARE PRINTING 6 - 14 Configuring the Brother Print Server (Queue Server Mode in Bindery Emulation Mode) Using PCONSOLE and BRCONFIG 1 Login as Supervisor (NetWare 3.xx) or ADMIN (NetWare 4.1x or later; be sure to specify the /b option fo.

6 - 15 NOVELL NETWARE PRINTING 11 Press INSERT to create a new queue on the file server, type the new queue name and press ENTER. The name does not have to be related to the name of the print server resources, but should be short and convenient fo.

NOVELL NETWARE PRINTING 6 - 16 Important: Do not assign a password to the print server or it will not log in. 5 Return to the main Available Options menu by pressing ESCAPE. 6 Select Print Queues. 7 Press INSERT type in the desired print queue name .

6 - 17 NOVELL NETWARE PRINTING 13 Make sure that the new printer name is highlighted, and then press ENTER. You will be shown the Printer Configuration Window. 14 Select Print Queues Assigned: (See List), and then press ENTER. The list of print qu.

NOVELL NETWARE PRINTING 6 - 18 ■ Service is the name of the service assigned by NetWare print server name (where the default services are BRN_xxxxxx_P1 for the Brother printer, where xxxxxx is the last six digits of the Ethernet address (MAC add.

6 - 19 NOVELL NETWARE PRINTING 5 Press INSERT, type in the desired print queue name (with NetWare 4.1x, you will also be asked for a volume name; press INSERT and select the appropriate volume), and press ESCAPE to return to the main menu. The fol.

NOVELL NETWARE PRINTING 6 - 20 The following steps apply to configuring a remote printer on NetWare 3.xx systems: 6 a Select print server Information from the PCONSOLE main menu and choose the name of the PSERVER NLM. b Select print server config.

6 - 21 NOVELL NETWARE PRINTING b Select the Brother print server from the list of print servers. When you get the message that the print server is connected, press the ENTER key and type the default password access in response to the # prompt (the.

NOVELL NETWARE PRINTING 6 - 22 Other Sources of Information 1 Visit http://solutions.brother.com for more information on network printing. 2 Refer to chapter 10 of this User’s Guide to learn how to configure the IP address of the printer. . Mac osx serial terminal app.

7 - 1 PRINTING FROM A MACINTOSH ® 7 7 Printing From a Macintosh ® Printing from a Macintosh ® Using AppleTalk ® and TCP/IP or the Simple Network Configuration capabilities of Mac OS ® X. Overview Brother print servers support the AppleTalk.

/halo-4-for-android-free-download.html. PRINTING FROM A MACINTOSH ® 7 - 2 Quick Tips: 1 The default name that will appear in the Chooser of a Macintosh ® will usually be BRN_xxxxxx_P1_AT (where xxxxxx is the last 6 digits of the Ethernet address) 2 From a Macintosh ® network, the e.

7 - 3 PRINTING FROM A MACINTOSH ® Macintosh ® Configuration (Mac OS ® 8.6 to 9.2) Your Brother Printer is compatible with the standard Apple LaserWriter 8 printer driver (earlier versions of the LaserWriter drivers may crash or cause PostScrip.

PRINTING FROM A MACINTOSH ® 7 - 4 How to Select the Print Server (AppleTalk/ EtherTalk) Once the print server is connected on your network and the printer is powered on, the Brother print server’s AppleTalk service name (default is BRN_xxxxxx_P.

7 - 5 PRINTING FROM A MACINTOSH ® 2 Select Printer LPR, and then click OK. 3 Click Change in PostScript Printer Description (PPD) File. 4 Select the appropriate PPD file for the printer and click Select. .

PRINTING FROM A MACINTOSH ® 7 - 6 5 Click Change in LPR Printer Selection. 6 Enter the IP address and service name of the printer you are using. When specifying the queue, use the BRN_XXXXXX_P1_AT. XXXXXX are the last six digits of the Ethernet .

7 - 7 PRINTING FROM A MACINTOSH ® 8 Click Create. 9 Enter the name of the printer you are using under Save desktop printer as, then click Save. Example) HL-XXXX series 10 Click the printer icon on the Desktop. 11 From the Priting menu, select Set D.

PRINTING FROM A MACINTOSH ® 7 - 8 Macintosh ® Configuration (Mac OS ® X 10.1/10.2) The appropriate PPD file supplied with your printer must be installed. Insert the CD-ROM into the CD-ROM drive of your computer. Double click the Start Here OS.

7 - 9 PRINTING FROM A MACINTOSH ® For AppleTalk connections, the printer's AppleTalk service name is BRN_XXXXXX_P1_AT, where XXXXXX is the last six digits of the Ethernet address. Printing the settings page will allow you to confirm the MAC a.

PRINTING FROM A MACINTOSH ® 7 - 10 Printing from a Macintosh ® Using the Simple Network Configuration capabilities of Mac OS ® X. The Simple Network Configuration capabilities of Mac OS ® X lets you create an instant network of computers a.

7 - 11 PRINTING FROM A MACINTOSH ® Changing the Configuration From a Macintosh ® , the easiest way to change the printer or print server parameters is to use a web browser. Simply connect to the printer using the format: http://ip_address where i.

DLC PRINTING 8 - 1 8 8 DLC Printing Printing from Windows NT ® 4.0 or Windows ® 2000 Overview DLC is a simple protocol that is included in Windows NT ® 4.0 and Windows ® 2000 as standard. It can be used on other operating systems (such as Wi.

8 - 2 DLC PRINTING 3 Select DLC Protocol and then OK or Add if using Windows ® 2000. You may be asked for the location of the files. For Intel based computers, the necessary files are stored in the i386 directory of the Windows NT ® 4.0 CD-ROM.

DLC PRINTING 8 - 3 9 The selected print server address will then appear in the smaller box under Card Address. 10 Type in any desired name for the port (the name must not be the name of an existing port or DOS device, such as LPT1) and click OK th.

8 - 4 DLC PRINTING 6 The selected print server address will then appear in the smaller box under Card Address. 7 Type in any desired name for the port (the name must not be the name of an existing port or DOS device, such as LPT1) and click OK the.

DLC PRINTING 8 - 5 Other Sources of Information Visit http://solutions.brother.com for more information on network printing. Brother does not recommend using the DLC protocol with Windows ® for Workgroups 3.11 in a peer-to-peer configuration if .